![]() |
will my headers fit my 5.0 with gt40 heads
i just picked up a whole engine from a 96 explorer and its got gt40 heads not the gt40p heads ive herd of people saying headers will work and some say they wont i got a set of stock headers and a set of mac 1 5/8 shorties will they fit?
|
Re: will my headers fit my 5.0 with gt40 heads
As long as theyre not "P" heads, they should fit. Any idea what kind they are? x, etc?
|
Re: will my headers fit my 5.0 with gt40 heads
they just say gt on the front corner and have 3 bars at the front and back and i was the told the p's got 4 bars and say gtp also do i have to convert to mass air to run these heads and i got the gt40 explorer intake to
|
Re: will my headers fit my 5.0 with gt40 heads
the heads you have should be the straight gt40 heads. The gt40p's do have four bars. Gt40 heads should not cause a problem when it comes to headers, from everything I have read.
Ryan |
Re: will my headers fit my 5.0 with gt40 heads
Look next to #1 spark plug hole, a GT40P head has a "P" cast right into it. Headers will work just fine if they're straight GT40 heads.
|
Re: will my headers fit my 5.0 with gt40 heads
they say just gt no p also im gonna throw my 88 cam in my 96 engine do i have to use my lifters from the 88 or 96?
|
Re: will my headers fit my 5.0 with gt40 heads
Use the lifters from the '88 and DO NOT MIX THEM UP. They have to go on the same lobe they came out of. Lube the heck out of them too, good assembly lube. Then pray to the cam gods that it doesn't wipe the cam out.
|
Re: will my headers fit my 5.0 with gt40 heads
Let me get this striaght you have to change the cam and you are putting a "stock" mustang cam in there.
You have decent heads, do yourself a favor and install a decent cam. :rolleyes: |
Re: will my headers fit my 5.0 with gt40 heads
well, I am not sure a new cam is all that neccessary. I have ported my e7's extensively, gasket matched...and all the good stuff. They should be good decent flowing heads. I have been under the impression the stock cam will respond well to the opened up heads. Do not know yet, since the weather is not good enough here to test them out.
You guys think it is needed for his set up to upgrade cams? Ryan |
Re: will my headers fit my 5.0 with gt40 heads
If you use the stock cam your going to get inferior horsepower. Upgrade them. Its for the best.
|
Re: will my headers fit my 5.0 with gt40 heads
Quote:
|
Re: will my headers fit my 5.0 with gt40 heads
Quote:
Ryan |
Re: will my headers fit my 5.0 with gt40 heads
i got no more money for this car the only reason i got the heads and intake is because i lucked out and got a whole 96 explorer motor for 150$
|
All times are GMT -5. The time now is 12:52 AM. |