MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   dyno numbers not 2 bad (http://forums.mustangworks.com/showthread.php?t=45931)

mr49south 04-22-2005 09:08 AM
dyno numbers not 2 bad
 
my 302 with the basic bolt ons pulled 321 on motor an 430 on a 125 shot not 2 bad tell me what u think

Dark_5.0 04-22-2005 11:16 AM
Re: dyno numbers not 2 bad
 
Either one of your bolt ons makes a whistlng noise or you are counting heads/ cam/ intake as bolt ons or the dyno was phucked on your motor pull thats what I think.

I have dynoed my car a few times and seen hundreds of 5.0 dyno's and it takes a pretty serious set-up to pull 321 RWHP with the stock blocked 302.

Dark_5.0 04-22-2005 11:23 AM
Re: dyno numbers not 2 bad
 
Quote:
Originally Posted by mr49south
i have a 89 lx with stock 302 with twisted wedge heads. it has a75 tb 24inj 73 massair.it runs 7.39 at 100 ,with 125 shot of gas. with a 1.67 60ft. how can i get a better sixty.
HA!!!! :D

Well now that I know you are not claiming to dyno 321 to the wheels with stock heads cam and intake :D

321 to the wheel is very good with the stock block what was your RWTQ?

mr49south 04-22-2005 01:49 PM
Re: dyno numbers not 2 bad
 
my torque was328.7on motor an488.7 on gas


All times are GMT -5. The time now is 11:16 AM.