Tfs Cam
 

How good is a stage 1, compaired to a E-303

Re: Tfs Cam
 

At most the difference between the E cam and any other off the shelf cam is 1 tenth.

The E303 cam is a pretty decent cam. I have a cammotion custom grind but I am in no hurry to install it.

The trick flow cam does hold idle better than the E303 though.

Re: Tfs Cam
 

A tenth? better or worse? I have the tfs, got it and the dist gear for $75.00

Re: Tfs Cam
 

Do it!!!!!

I would like to see the results.

I bet the difference between the 2 is negligable.

Re: Tfs Cam
 

buddy of mine gained 3 tenths when switching out E for tfs stage 1. id say go for it.

Re: Tfs Cam
 

I have been so confused, I ported some stock heads, and was gonna spay a motor till it blew. Grocerygetter said don't waist the time or motor, so I finished porting the hollys and will be putting the systemax set up on the car. With the tfs cam. Speed density, and 100hp shot. Later I will swap to mass air to see if it is better. And by then the 342 will be done.
On top of all this the 4 wheeler has gone a 6.44 @ 100.7 with a 1.41 60ft. And I am seeing a NEW Little mama, so I can care less about the car and the bike. She is badder than both of them together. 26 fine, sweet, and gorgeous.