Headers for a 351-w ?
 

I`m having some serious problems finding a set of headers for a 351 for the 79-93 stang when running an auto trans , what does everyone run for headers any help pointing me in the right direction would be greatly appretiated thanks in advance for any advice

Re: Headers for a 351-w ?
 

sorry forgot to say that i would prefer full length not shorties so i can uncork them when i get to the track

Re: Headers for a 351-w ?
 

Hooker makes a set of 13/4 full lentgh, bought ours thru jeg's I believe. Fit a C4 in a 90 Lxwith stock crossmember, Passenger side is tight but fits. fit easier after out in a tubular K Member

Re: Headers for a 351-w ?
 

what type are they , the competion , super comp etc?

Re: Headers for a 351-w ?
 

anyone know of the bbk long tube models they say they won`t fit an auto but will a manual what am i missing here the bell housings are what would create the clearence problems are they not? why would man or auto matter help please !

Re: Headers for a 351-w ?
 

It's the width, dude. A C4 transmission usually isn't a worry, but a fat mama AOD? Yeah, trust me, most full-length headers are NOT going to fit. I found this out the hard way, too. :( There is always kooks headers. They are custom made and cost an arm and a leg, but they fit and they work. While I don't personally have a set (I wussied out and went with shortie headers), I've heard the quality is excellent. Google it to get the web site URL.

BTW, the part where the interference occurs is right at the height where the pan is. On my installation, the collectors bumped up into the sides of the pan. Since I'm both lazy and reluctant to cut & weld tubing, I just borrowed a friend's shorties. FWIW, it's not like there's a HUGE difference between the two, anyway. Best of all, your HEGO sensors will be right where they were intended to be, instead of another ten inches downstream. Read that as: better mileage, power, and a/f control. :)

Re: Headers for a 351-w ?
 

i`m not goign to run either c-4 or an aod , how much did they interfere witht he pan (1/2 ) or what , do you think it could be done? Hooker super comps say they will work but ah and extra 100 over the bbk`s like damn no matter what you can`t save a penny if ya wanna do it right

Re: Headers for a 351-w ?
 

Okay, then what ARE you running? The full-lengths will fit (albeit snugly) with a C4 (at least they did on my '79 Capri), but are a no-way-in-hell fit for an AOD. Regarding how full-lengths fit with any other transmission, I haven't a clue. Mind you, this was a set of full-length BBK's I was trying to fit.

Spend the extra money. You'll be sorry if you don't.

Re: Headers for a 351-w ?
 

sorry i ment to ask if those bbk`s will fit a a c-6 , but i was thinking it not really that big of a deal when a person can just heat them up with a torch and give them a heev and ho to bend them out away from the tranny pan if thats the problem simple fix and if worst comes to worst i have to badn them out so far that i crack/ break the chrome plating all around the bend and have to spring for them to be ceramic coated , if there is more than pan issues i will just say screw it and buy a kit and build them i just wanted something quick and didn`t have to screw around with for a day lol

Re: Headers for a 351-w ?
 

I have a set of LIKE NEW Hooker Super Comp, 1.75" headers sitting here for the fox body. I can make you a killer deal on them.

Re: Headers for a 351-w ?
 

PM me how much you would want for them , and i`ll see what i can do , cuz this searching through summit and jegs for over prices stuff is gettin on my nerves