MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   stock block w/ 15 PSI (http://forums.mustangworks.com/showthread.php?t=465)

STOCK LX 01-23-2001 01:53 AM

stock block w/ 15 PSI
 
Does anyone know how a stock 302 block will handle 15PSI from a D1 procharger? My bottom end only has ARP rod bolts. Thats it. I have TFS heads and E303 and all the other typical stuff. Any ideas on how long it will last. Thanks.

WADS56 01-23-2001 03:59 AM

Keep away detonation, give it plenty of fuel, and check your plugs for any signs of problems. Lots of people run lots of boost on stock bottom ends, and there engins live long happy lives. If this is your first supercharger I would start out small (like 8#'s) and work your way up so you can get an idea on how it will react.

------------------
blown347,free breathing heads and exhaust, solid roller cam, tremec,moser axles, 4.10's, role cage and all the other stuff.
11.8 @ 115 very untuned

1993lx5.0 AOD dailydriver

MY91GT 01-23-2001 08:19 AM

Talk to anderson motorsports...they will give you a good idea on how much a stock block can take..usually they say anywhere from 10-14 psi with a pms.

SLOWPONY 01-23-2001 10:26 AM

You can do it.Don't put alot of timing in it and give it more fuel than you normally would.


All times are GMT -5. The time now is 02:15 AM.