Driver's seat became unattached from floorboard!
 

Was driving over a bumpy road the other day, and my driver's seat became loose. got home, and looked; and the bolt was tight, however taking up the carpet showed it had broken away from the floor board. Is there a "patch" that Ford has for this that I can get to weld back to secure the seat again? thanks.
Stan

Re: Driver's seat became unattached from floorboard!
 

U could probably have someone weld in a plate to bolt to. Be sure to remove carpet in those spots before the welding starts....

Re: Driver's seat became unattached from floorboard!
 

yeah what he said. plus have a fire exstinguisher handy.

Re: Driver's seat became unattached from floorboard!
 

same thing happend to men. i was drivin down the road and BAM, fell in the back seat basically.

yeah man, just weld in ur own plate

Re: Driver's seat became unattached from floorboard!
 

That's another good reason to have subframe connectors that have the cross brace for extra support for the seats.

Re: Driver's seat became unattached from floorboard!
 

my 92 gt did the same thing. I put in a new floor pan and added subframe connecters. Hopefully it won't happen again.

Re: Driver's seat became unattached from floorboard!
 

I put on BBK sub frame connectors which had a bracket for the seats to bolt to. Outstanding. Helped with the flexing of the body overall. Hole shots even feel stronger. Not bad for $129. BBK's worked well.

Re: Driver's seat became unattached from floorboard!
 

I had mine pull out on a hard launch. I soaked the carpet with water and then mig welded the stud back in there. Easy money.

Re: Driver's seat became unattached from floorboard!
 

That's good but you paid way too much for subframe connectors.