MAF ???
 

How do you know when the mass air flow sensor isn't working properly? Is their a way to test it.

------------------
67'fastback-Edelbrock carb,intake,cam,valve springs.Rhode lifters, CompCam rocker arms, windage tray,cerama coated headers,dual flows with H-pipe, modded c-4,tci stall converter,perma cool electric fan,aluminum water pump,griffen aluminum radiator,accel 8.8 cable,wide cap distriburator,magnetic pick up,v-matic hurst shifter,edelbrock performer nitrous, carter electric fuel pump,ignitor coil,solid motor mounts,magna racing suspension,poly urathane bushings,under rider traction bars, comp. eng. s

do you haver access to a code scanner? Usually they'll throw a code when they aren't working right... Good luck!

------------------
Joe! 1988 GT, 167,000 miles!!! 13.58@105mph Check out my listing! Click here! Or my website:www.joe4speed.com
99 Ninja ZX-6R:10.32@135mph!
1993 Olds Eighty Eight LSS 16.40@88.8mph http://www.duhspot.com/users/smiley/.../outtahere.gif

You can backprobe the MAF harness and check the voltage. First, you could check battery volatage and then signal voltage. It should be .2 - 1.5V at idle. As you increase the engine RPM the MAF signal should increase to 2.0V or slightly above. If that doesn't work, use an ohmmeter on the harness and see if there is a broken connection. If that doesn't work, your MAF is fried.

------------------
Blueneonman - '95 5.0L Mustang GT Convertible | K&N Custom Cold Air Intake | FMS 9mm Wires | Hollow Cats | Flowmaster 2 Chambers | BBK Subframes | 6-pt Rollcage | King Cobra Clutch | FMS Adjustable Clutch Cable | B&M Short Throw | Coolest Neon Lighting on a Mustang EVER!

Homepage: http://www16.brinkster.com/blueneonman/