MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Modular Madness (http://forums.mustangworks.com/forumdisplay.php?f=17)
-   -   Underdrive Pulleys & Mach 360 (http://forums.mustangworks.com/showthread.php?t=47942)

Narshadda 02-27-2006 12:30 AM

Underdrive Pulleys & Mach 360
 
Hey all,

I am seriously considering putting on the underdrive pulleys this week, but I am a little worried about the charging factor.
My car is a daily driver and I do sit around in traffic quite a bit.
Has anyone experienced any problems with running Steeda (or any other brand) pulleys on a stock alternator in a 2004 GT?
The last thing I want to do is cause damage.

Thanks ahead of time for the expertise!

-Narsh

bigwhitecobra 02-27-2006 10:28 AM

Re: Underdrive Pulleys & Mach 360
 
I'm running the same setup and have no problems. If you change them all, alt, waterpump, and crank, you should have no issues. The problems usually come when the only the water pump, and crank are replaced. Then people will complain about it, and well, you get the idea.

P.C. 02-27-2006 12:15 PM

Re: Underdrive Pulleys & Mach 360
 
No Problems With My 03 Gt.i Have Steeda Pulleys,mach 1000 Stereo.you May Knock Off 2 Tenths In The Quarter Mile Thats What I Gained.the Steering Is A Little Harder When Im Manuvering Into The Garage With The Pulleys.once Your Rolling On The Road No Problem.

Narshadda 02-27-2006 02:38 PM

Re: Underdrive Pulleys & Mach 360
 
Perfect! Thanks guys...
After this I'll be headed towards the exhaust but I am saving up to get the midpipe and the catback at the same time. I am hoping to be in the 13's with that setup...

Air Fiter
Pulleys
Cat Back
Midpipe

Narsh

332cobra 02-27-2006 05:03 PM

Re: Underdrive Pulleys & Mach 360
 
narshada, were you concerned with the pulley kit effecting the ability of your alternator to recharge your battery correctly?

Narshadda 02-27-2006 08:50 PM

Re: Underdrive Pulleys & Mach 360
 
I am concerned with the battery recharge and any other negative effects. A lot of the guys here have the pulleys installed and I wanted any thoughts really..

blue00gt 02-28-2006 05:50 PM

Re: Underdrive Pulleys & Mach 360
 
Newer stangs don't have trouble with underdrive pulleys like 5.0s did.

332cobra 03-01-2006 02:11 PM

Re: Underdrive Pulleys & Mach 360
 
sounds like a worth while cause. can you give it a shot Narshadda and post the results? i'd like to add this steeda under drive pulley kit to my box aswell.

Narshadda 03-01-2006 05:09 PM

Re: Underdrive Pulleys & Mach 360
 
yeah next week....


All times are GMT -5. The time now is 08:29 PM.