MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   1/4 mile times (http://forums.mustangworks.com/showthread.php?t=4841)

joey50gt 07-28-2001 01:50 PM

1/4 mile times
 
what do you guys think a 5speed coupe with 270rwhp and 330rwtq would run in the 1/4 mile on good street tires? I am guessing some where around 13.5 and maybe bust into the 12's with a good launch on a set if slicks.

Mr 5 0 07-28-2001 01:52 PM

Good guess but 12's are iffy, even with slicks.

buffhomer 07-28-2001 02:12 PM

Look for low 13s, and possibly a high 12, but with high mph.

------------------
1990 GT--Cold Air Ind., Full exhaust, pulleys, electric fan, manual rack, 76mm MAF, NX wet kit

Tremec, Pro 5.0, FMS clutch, 3.73s, F5 uppers, Megabite Jr. lowers, 70/30s, 50/50s, 4-cyl springs, !sway bar

N/A
60ft-1.87
1/8--8.69
1/4--13.61@99.93

NX (100shot)
60ft--1.76


lx mike 07-28-2001 02:24 PM

I'd say it depends on the rest of your combination of parts. what else do you have?? what does car weigh?? need more input. takes more than H.P to run quick

Vector 07-28-2001 07:47 PM

ET CALCULATOR RESULTS
ET your car is capable of: 13.42
MPH your car is capable of: 101
Given ideal conditions, this is roughly the elapsed time (ET) and mile per hour (MPH) your Mustang could run.

I used 270hp and I guessed your track weight at 3300 pounds.

TEXSN95 07-28-2001 08:13 PM

I have 284hp / 323 ftlbs at the wheels and my combo can run a 13.2 @ 107+ as it is...it's not maxed out yet. And that's with a heavy SN95 with a detuned EEC and 3.08s and radials. The ET calculator is close with the ET but way off on the MPH.

------------------
Clint L.
White 95 Cobra #3637
58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW LCAs, Kenny Brown super subs, Steeda CC plates, aluminum driveshaft, Steeda quadrant, B&M ripper, Kirban FPR, MSD6A, Taylor wires, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s
13.61 @ 105.7 w/ 2.22 <-- 284 rwhp / 323 rwtq

[This message has been edited by TEXSN95 (edited 07-28-2001).]

Stang Runner 07-28-2001 09:32 PM

Vector I think you put 270HP in but that is at the Flywheel not for the rear HP.

07-28-2001 09:43 PM

Low 13's.....maybe very high 12's w/ great launch, perfect ride and a prayer http://www.mustangworks.com/msgboard/biggrin.gif! Let us know how you make out!

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach drag-launch spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; Cervini's 3" turbo hood; A/C-less; cat-less; 2 chamber Flos; Corbeau racing seats; FMS 30# injectors; JMS chip; Holley 190lb fp; TFS track heat Intake (12.299 @ 113 - 1.78 60')

Beni 07-29-2001 08:05 AM

on street tires, the driver is everything. I dont know your combo, but I would assume from a 13.7 down to a 12.90 is possible on street tires...with a maximized combo, and slicks you do have the potential to hit the 11s. Keep that in your mind when you go to the track...the driver is everything.

------------------
86GT bastard car w/83front,91 glass, 92 LX taillights, and a pile of parts
stock 86shortblock, stock cam, ported E7TEs, longtubes, and an attitude

93 Taurus SHO (stock)
jojo@gibralter.net

SaleenGTS 07-29-2001 10:20 AM

in a 3400 lb car(w/ driver) 13.0-13.1's with good driving...105ish for speed.

My old LX coupe I had about 3 years ago with GT-40 heads,Cobra Intakes, and a E cam. ran a 12.80@107, but it weighed 3100 with me. It dynoed 274, but only had 306 rwtq.

------------------
Dustin
89 Saleen GT Sport,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,Crane 1.6 rr's,BBK 70mm TB,Pro-M 80mm MAF,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

Piston 07-29-2001 07:46 PM

Saleen GTS you have 428 rwhp and you only run 12.3's??? Is that with that setup?

exgmguy 07-29-2001 08:20 PM

Piston. It is called "no traction". I runs similar to SaleenGTS's numbers If your 60 ft's stay 2.0 or slower it is damn near impossible to hit 11's!!!! (unless you trap around 125-130)


Anyway, when my car dynoed 270 hp, and like 305 tq, I was running 12.8's @ 109-110. My track weight was approx 2950-3000 lbs. A stock 5.0l coupe weighs around 2900 lbs.

SaleenGTS 07-30-2001 04:00 PM

piston
yeah I ONLY run 12.3's on street tires. ONLY running 12.3's is better than a lot of people run on slicks, so I am satisfied. 119 is what I am interested in though. Times don't mean squat to me if the mph is there. ET doesn't tell hp, mph does. I could run a 14.5 @ 119 on street tires and be happy.

What do you ONLY run??


Thanks for the backing up Rob.

------------------
Dustin
89 Saleen GT Sport,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,Crane 1.6 rr's,BBK 70mm TB,Pro-M 80mm MAF,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

07-30-2001 04:27 PM

Saleen, you ONLY ran 12.3? Man, that's slow, I ran a 12.29 http://www.mustangworks.com/msgboard/biggrin.gif http://www.mustangworks.com/msgboard/biggrin.gif http://www.mustangworks.com/msgboard/biggrin.gif. I don't know if Piston meant how it sounded, but doesn't it feel slow to you now? It seems that everytime I cut time off and gain mph, it kicks a$$ for a few weeeks and then it feels slow and I can't wait for the next mods. I think it's a mental problem we all have - called speed addiction http://www.mustangworks.com/msgboard/biggrin.gif!

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach drag-launch spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; Cervini's 3" turbo hood; A/C-less; cat-less; 2 chamber Flos; Corbeau racing seats; FMS 30# injectors; JMS chip; Holley 190lb fp; TFS track heat Intake (12.299 @ 113 - 1.78 60')

exgmguy 07-30-2001 04:31 PM

I heard that!!! I remember drooling over Mustangs at the track that ran fast. Now I am right there with them! And I WANT MORE!!!!HAHAHAHAHAHAHhahahahaahh....haha...ha...hu h..huh...mmmmmm.

SaleenGTS 07-30-2001 06:03 PM

Yeah, I would love to throw a set of slicks on it, but I already broke 3 lugs off the rear rotors, and they are a pain to tap out.
Plus I don't want to break anything else. I love the raw acceleration. 0-100 in less than 9 seconds is mighty fun.

Although, I am getting greedy. I have a 200 shot waiting for my new motor. http://www.mustangworks.com/msgboard/biggrin.gif http://www.mustangworks.com/msgboard/biggrin.gif http://www.mustangworks.com/msgboard/biggrin.gif http://www.mustangworks.com/msgboard/biggrin.gif

Then we'll see how slow I am....lol

------------------
Dustin
89 Saleen GT Sport,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,Crane 1.6 rr's,BBK 70mm TB,Pro-M 80mm MAF,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg


All times are GMT -5. The time now is 02:01 AM.