What heads should i buy
 

I'm looking into buying a new or used set of heads alumnuim perferbly but cast if good and decently priced my motor is a carbed 306 with Probe n20 pistons Eagle h beam rods lunti n20 cam .577 lift d.s.s stud girdle so you guessed it i'm gonna spray a little http://www.mustangworks.com/msgboard/smile.gifany sugesstions will help thanks

------------------
P.M.D. PERFORMANCE 88GT
306ci
paracing.net

Are your pistons notched for valve clearance? If so go with the AFR 185's. If not get the TFS Twisted Wedge.


------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

Yep there notched

I know Trick Flow had problems in the past, but I have recently seen a couple posts about problems with their quality resurfacing so I'm kinda sceptacle about them. The only problem I have seen from AFR heads was a guy that had one of the helicoils come out after trying to tighten a rocker blot down that was too long so it was actually his fault. I've done a ton of research on heads and I think I'll be going with either AFR 185's or 205's or maybe some Canfields for my 393 Stroker when I get it finished. My info is all based on reading up on these heads on message boards and in magazines and not actual hands on so I don't really know what I'm talking about http://www.mustangworks.com/msgboard/biggrin.gif

You might try searching for old posts about different heads and engine combos and see what comes up.

Where you been dirtyGT? I'm the guy from Northern Indiana (AxemanZZ was my old nick). You and your buddies ever going to make it to a meet up here?? We had 99 cars at our last one http://www.mustangworks.com/msgboard/biggrin.gif

------------------
Gunning for 12's!
http://www.indianastangers.com/2Fast..._brd_logo2.gif
Buy your parts here
ICQ# 42269241

Hey 2fastLX yea i'll be up as soon as i get this car going.Mine's down my buddys is down.Let me know when the next one is maybe i can get my buddy to bring his Super Street Outlaw car up.He also knows Gary Rohe 4 time ez street champ check out there parts and a picture of there car(old pic) at paracing.net

------------------
P.M.D. PERFORMANCE 88GT
306ci
paracing.net