MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   help with 302 (http://forums.mustangworks.com/showthread.php?t=49607)

lbrew4 04-04-2007 03:07 PM

help with 302
 
i have a 1988 ford gt. the 3/8 rubber line off the back of the upper intake broke in half, i can not find the other end. can anybody tell me where it goes?
thanksw larry

1989GT 04-05-2007 08:52 AM

Re: help with 302
 
It goes to the pcv valve. It's in the back of the lower intake.

lbrew4 04-05-2007 02:20 PM

Re: help with 302
 
the 3/8 line goes to the pcv. got it, now the 1/4 line goes where? the front part of the line goes to the can at the bottom of the frame, and the back goes where? that is the one i lost. i was wrong on the size before.
thanks
larry

USMC302 04-09-2007 03:28 PM

Re: help with 302
 
http://www.veryuseful.com/mustang/te...g5.0Vacuum.gif

This should help. one of the lines from the vacuum tree should be going to the Fuel pressure regulator, is that on there? one should be going to the MAP sensor, is that one there? Hope this helps....

USMC302 04-12-2007 11:14 AM

Re: help with 302
 
the one coming off the end of the intake and not off the vacuum tree should go to the vacuum tree on the firewall. let us know if you found it.

lbrew4 04-19-2007 10:53 PM

Re: help with 302
 
it was the 1/4 going to the map. i would never have found it. the connection was behind the air cond hose. i have it going again and have been enjoying the ride. thanks to you.
larry:)


All times are GMT -5. The time now is 09:58 AM.