Do Pwr Pipes give HP to a N/A stroker? My cold Air induction is smaller than MAF!
 

I have a Cold Air induction kit and it is actually smaller than my 70MM TB and MAF meter, along with my Intake. Will a "power" pipe help me??

------------------
Finally DONE!!
93 GT, 393 stroker w/ Edlebrock Performer heads and EFI, 30lb injectors, Dynamic Roller Mite C4, 8 pt cage, Sothside Machine bars & Sub-frames, 3.73's, '69 351W block w/SCAT crank.

What kind of cold air intake do you have? How big is your MAF?

------------------
95gt 80k, MSD 6AL, MSD coil, pulleys, fpr, cold air kit, off road h-pipe, flowmasters, 3.73, 9mm wires, mega bite jr lowers, kennybrown subframe connectors, edelbrock performer intake, 70mm TB, 73mm C&L, 24lb injectors Aluminum Driveshaft, Tri-Ax shifter.

My BBkrap is 65MM and the MAF is Pro-M 75MM calibrated for 30 lb. injectors

I would think the power pipe would increase velocity regardless of being naturally or artificially aspirated.

artificially aspirated?????

------------------
90 GT 150k on the motor never had the valve covers off, 1 5/8" headers, x-pipe, 2chamber flowmaster,fms aluminum ds, 3.55, best time on 245/45/17 2.08 60', 13.906 @ 98.98

Although I can't speak for him I assume Unit5032 means Supercharged or NOS when he says artificailly aspirated.

Well I can say I can feel the difference between the stock intake tube and the one that came with my 76mm C&L. MM&FF put a striaght piece of 3" tubing on their test motor and picked up 13hp..

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! <B