MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   West (http://forums.mustangworks.com/forumdisplay.php?f=111)
-   -   clutch cable question (http://forums.mustangworks.com/showthread.php?t=50527)

jkjetboat 09-13-2008 12:30 AM
clutch cable question
 
I bought a 92 coup the car would not enguage until 4000 rpm i found that the previous owner installed new clutch cable the cable was to short which had the clutch enguged i removed cable because there is no way to adjust it so i cut the steele sheath to allow cable to lengthen my question is there is a half inch still between fork and back of bellhousing should i cut more off?

explicitone 09-13-2008 03:44 PM
Re: clutch cable question
 
Quote:
Originally Posted by jkjetboat (Post 334110)
I bought a 92 coup the car would not enguage until 4000 rpm i found that the previous owner installed new clutch cable the cable was to short which had the clutch enguged i removed cable because there is no way to adjust it so i cut the steele sheath to allow cable to lengthen my question is there is a half inch still between fork and back of bellhousing should i cut more off?
you should buy a new cable that is right for the car........ also you might want to check the quad. to make sure thats not the problem as well.... but modding the cable I wouldnt do it...thats just asking for trouble


All times are GMT -5. The time now is 02:09 AM.