dry nos guys..i need help
 

ok im installing a zex kit on a freinds car and wanna do it is ganna be completely hidden..i just have one question..
can i put the jet into the EGR spacer???..
this will be a gt-40 intake..i dont see why it wouldnt work beacsue they make plate shots that go inbetween the EGR and TB..once i get it done and i see that it works ill share with ya guys exactly how i hid it but intill its done im ganna try to keep my trap closed..but if it works it will the the absultleyly phatest spot ever!

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch
http://cwm.ragesofsanity.com/contrib/owen/scatter.gif

TTT..please help me..i was looking at my gt-40 intake and dont see y it wouldnt work

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch
http://cwm.ragesofsanity.com/contrib/owen/scatter.gif

If you drill into your spacer make sure that your nozzle goes in far enough. I've seen nozzles that don't quite make it and give a really nasty spray pattern into the intake. I can't really see a problem with drilling into the spacer as long as the EGR system still functions properly after installing the nozzle.

That will work just fine. I did it to my 93 cobra with gt 40 intake and it works just the same. You just have to replace the spacer if you remove the nitrous. Goodluck.