no compression in two cylinders/two plugs have raw gas on them
 

i did a compression test and the results sucked.why would two cylinders have 25-40 and the others have 140-150. on plugs 6 and there was raw gas on the plugs. please help

Doesn't sound too good. Either you have a sticking valve, or some broken rings, or something else pretty major wrong.

I think you have a blown head gasket, with the fire ring blown out between 2 cylinders.
Good luck.

------------------
92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc.

Which two were dead?

------------------
Retired Moderator
MustangNet

My site: JimPorterRacing

RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!

Hey Wes, just wondering if you have made any progress on your problem... Keep us informed http://www.mustangworks.com/msgboard/cool.gif

------------------
92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc.

i found out the cam i had in the car was no good (i hope). the guy i bought the cam from said he had some problems with it eating lifters and ate som of the cam (lol)he never told me this until after the cam was installed. i will replace the cam tomrrow with a trick flow stage 1 cam. i hope this will solve my problems.