Help with front wheel noise?
 

Well, like i posted earlier i jumped my car over a dip, with that done i was worried something might be screwed up, everthing seems alright except for a (clunking noise) near my driver side front wheel, only when im hitting a bump or pothole, it sounds like a shock or something in the suspension, any ideas???
thnx for any info guys.

Im gonna check the lug nuts, but it's too dark now.

------------------
90 lx coupe: Mac cold air fenderwell, accel supercoil,advncd ignition,3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows.
Best time: 14.1623(on 225/60/15 firehawks)
Best mph: 97.80
Best 60': 2.0728
next mods: subframes, 3.73's

That sounds bad. you may have blown your front shock, or worse. Uh, check to see if anything is leaking from the shock, then check the mounts. If that looks ok, check out your cross member. I'm not really sure what to look for, but if it's as bad as it sounds, you'll see it. Check your mounting hardware for your brakes, etc. Let me know what you find, cause I hate seeing a good 'Stang in pain.

Hey, I'm a poet, and didn't know it!!

------------------
1989 GT- Vortech blown 306, Anderson 3" power pipe, Vortech S-Trim 14# boost, MSD-6BTM, black wrinkle finish Cobra valve covers(woohoo), world class T-5, 3.55 gears, custom sub-frame connectors, Cobra grille insert and rear valance, Saleen "whale" wing, 4 wheel disc conversion, est 1/4mile time of 10.5+/-
1994 Cobra- MAC cold air fender kit, Motorsport underdrive pulley's, MAC 21/2" off-road H pipe, SVO mufflers, 3.73 gears, E-303 cam, 13.417@101.335mph

Appreciate the reply, i know my car hit hard, but doesnt pull or swerve, a shock i beleive it is, today i was changing oil, but saw power steering fluid leaking as always, not bad though,

i will look further and repost, and wich mounts you talking about? i know my motor mounts are fine, my engine is sitting in the compartment and not shaking.

Oh and if it's the shock, some lakewood's 90/10's would be good for a replacement shock eh'