94 cobra question??
 

i recently bought a pretty much stock 94 cobra... does anyone know what size the stock tb and maf are? and, do i have to buy a tb especially for my year or will any 5.0 one work? does anyone know any good websites with stock techincal info on my car??

thanks, j

The throttle body is a 60 mm, i'm not sure of the MAF size. You have to buy a TB for 94-95 GT because of the EGR being on the intake in the 94-95 models. Good luck on the car, I LOVE MINE!!!

------------------
94 cobra, steeda tri-ax, ultra flo's

14.2 @ 99 (stock)

the MAF is 70mm I believe, I used a C&L from a 93 and it worked fine, just use the elctronics off the top of your stock meter & make sure the C&L has the right sample tube for your injectors, they also make a specific on for 94-95 that has a larger flange to adapt directly to you inlet tube. I would probably go with that being you are mostly stock, and for gods sake get a K&N!!!

On my 94 snake, the throttle body specifically says: "65mm." On it. I don't think it is aftermarket.

------------------
Black 2000 GT Auto
Bassani X-pipe, Magnaflow Mufflers, Steeda Pulleys, K&N Filter. Steeda Weld in Subframes, Strut Tower brace, Sport Springs, Caster/Camber Plates.
Ran Once, 14.52@96.57 with a 1.32 R/T!!!

Red 1994 Mustang Cobra #4343
Pulleys, Shorty Headers, K&N filter, short throw shifter.

I have been jumped on numerous times about saying the stock 1994-1995 Cobra's came with 65mm TB's. 1994-1995 appearently came stock with 60mm units. You'll need to get a T/B for 1994-1995 5.0s, if you want one. I doubt it'll do much for you. Get rid of the Cobra cam first.

Only the 1993 Cobra had a 65mm T/B.

The stock Cobra MAF is 73mm.