will a intake on a 5.0Lefi fit on a 351w
 

will a intake on a 5.0Lefi fit on a 351w

NO!!!!!!!!!!!!!!!!!. the intake for a 302 and 351 are differnt. you will need a 351 specific manifold.

i don't think so, i traded a set of mag wheel's for an early 80's 5.0 intake for my older 302, after checking it out it wouldn't work intake, & exh port's are way too much, & only slowed me down, i gave it to a freind with a 80's fox gt, anyway the joke was on the guy who got the , mag's they turned out to be gm.

------------------

You need a 351 EFI lower intake, but the upper will work (for instance 351W GT40 + 5.0 Cobra upper).

------------------
'91 LX Hatch, 17 ROH ZR6's, lowered, 3.73's, offroad H pipe, SN Cobra cat-back, ASP pullies, 14° timing, C&L 76mm MAF, 170A 3G, B&M Ripper on a T5
Best ET: 14.593 @ 94.62 2.292 60'
1991 LX Hatch 5.0L

A truck 351 intake (or any 351 EFI lower intake) can be used, but the upper plenum will fit off of any 302.

------------------
Just need the sticker!

Red 1993 GT
1969 351 block w/393 stroker. Edlebrock Performer heads and Performer RPM EFI, FRPP 30lb injectors & Cartech fuel system. JMS chip & MSD ignition.
Dynamic Roller Myte C4, 8 pt cage, Sothside Machine bars & Sub-frames, adj. upper's, 3.73's, Koni rear shocks