Adjustable FPR recommendations
 

What adjustable fpr(s) do you recommend? Need one for an 89 GT: Cobra intake, GT40P heads, E303 cam, 24 lb. injectors and MAF, 70mm TB, 190 lph fuel pump.

------------------
1996 Mustang GTS

Most all of them are good.
I heard very good things about the kirban.
Stay w/ a stock setting of 36 lbs. though

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

Don't get the $50 Hypertech. I bought a $99 BBK - mine leaked. I've heard they have a tendency to do so. Had to tighten the three Allen head screws on the bottom and it's been good ever since.
I've heard to run them at 39 lbs though. ??

[This message has been edited by withamc (edited 01-28-2001).]

Stay away from the Paxton/Aeromotive unit. Lots of folks have had problems with the bladders going bad in them. They may have fixed the problem in recent history, but I still don't trust them. I had the Paxton go bad in less than a year. Replaced it with a Kirban and its been good for three years now.


------------------
Jeff Chambers
Trophy Stock #3
11.97 Seconds / 114.5 MPH
Chambers Racing Team