MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   NEED TO BUY AN MAF ASAP, WHERE?? (http://forums.mustangworks.com/showthread.php?t=6159)

95mustanggt 10-03-2001 10:35 AM

NEED TO BUY AN MAF ASAP, WHERE??
 
HELP!

My one and only car is down with a shot MAF and I need a replacement part. I talked with Ford and they want $177 + my original for a Used stock MAF!

Dallas Mustang has a Pro-M 75mm for $209, but the delivery is a week, I can't wait that long!

Does anyone know a place anywhere that I can get a Pro-M 75mm MAF in a day to 2?

------------------
1995 Mustang GT

Smokedawg 10-03-2001 10:48 AM

You can pick up a 73mm Vortech from Summit in two days..They are only $125.00

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

95mustanggt 10-03-2001 10:51 AM

How is the Vortech unit? Is it decent quality?


Thanks so much for the quick response.

------------------
1995 Mustang GT

Smokedawg 10-03-2001 10:53 AM

I like it pretty well. But all I can compare it to is the stock unit. They are $125...

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

95mustanggt 10-03-2001 11:05 AM

Quote:

Originally posted by Smokedawg:
I like it pretty well. But all I can compare it to is the stock unit. They are $125...


Thanks Smokedawg I think I'll go ahead and give Summit a call. Once again thanks for the quick response.


------------------
1995 Mustang GT

95mustanggt 10-03-2001 11:29 AM

Amazing, $152 for a 73mm Vortech MAF hand delivered to my door. That sure beats the week+ wait time from some of the other shops I called.

------------------
1995 Mustang GT

89 Cobra LX 10-03-2001 12:20 PM

Ummm, uhhh, I don't want to worry you, but the Vortech MAF re-uses the stock electronics. When I put mine on I had to take the electronics off of the old MAF and bolt them onto the new one. Essentially, the Vortech MAF is just a bigger tube with a different sized sampling tube designed to "trick" the computer. You may not have solved your problem.



------------------
Eric - 89 Mustang LX coupe
302 - Cobra Intake - GT40p heads - TFS stage 1 cam - FRPP 1.6 roller rockers - Naturally Aspirated
3:73 gears - KYB shocks and struts - Eibach springs - HPM Mega-bite Jr lower control arms - HPM upper control arms

10-03-2001 12:43 PM

I got the Pro-M Billet MAF and really like it, no problems w/ it. I know a few people w/ it and they've had no complaints. I got it from Modern Mustangs (in the $180 range).....ask for Ray.

------------------
'90 LX 5.0;12K original miles;FMS 3.55 gears; March pulleys;Edelbrock Performer Heads;BBK 1 5/8" equal length shorties;MSD 6AL ignition w/ blaster 2 coil;FMS E303 cam;Pro-M 75mm MAF;BBK 70mm TB; Eibach drag-launch spring kit;Southside weld-on subs;9" K&N cone filter charger;Hurst shifter;Cervini 3" turbo hood;A/C delete;gutted cats;2 chamber Flomasters;Corbeau racing seats;FMS 30# injectors;JMS custom chip;Holley 190lb fp;TFS track heat intake (12.299 @ 113mph w/ a 1.78 60')
....soon to be b

95mustanggt 10-03-2001 02:27 PM

Quote:

Originally posted by 89 Cobra LX:
Ummm, uhhh, I don't want to worry you, but the Vortech MAF re-uses the stock electronics. When I put mine on I had to take the electronics off of the old MAF and bolt them onto the new one. Essentially, the Vortech MAF is just a bigger tube with a different sized sampling tube designed to "trick" the computer. You may not have solved your problem.


****! Thanks for the heads up 89 Cobra LX. I called the techline and they did not recommend the vortech unit to solve my problem. I had to order the Granatelli 75mm.

It was a lot more expensive, but I don't want to waste money getting the wrong part. It's best to do things the right way the first time around.

I hope it atleast gives me some more power.

------------------
1995 Mustang GT

Tony91LX 10-03-2001 03:56 PM

You can buy stock electronics from www.mass-air.com for $119 + shipping, all original ford parts. I had to replace my electronics on my 80mm C&L and the ford dealer here wanted to charge me $169+$90 core because I had tampered with the stock meter.

347MOM 10-03-2001 08:21 PM

Hey 95mustanggt. One of the best places around here is just a few minuites from you. Try USA Motorsports in Arlington. 1-877-695-7223. Ask for Archie.


All times are GMT -5. The time now is 01:46 AM.