Electric Fan???
 

What kind of electric fan would you guys/gals run on a high reving street/strip car to try to keep the temp. below 200 in the heat and traffic.

Thanks

------------------
88 Notch Natually aspirated 750 carb Edelbrock Victor Jr. Intake and heads 306/ATI C-4 4500 stall 4:10's 26x10.5 M/T MAC longtubes/prochamber Dynomax Race magnumss dumped, Caged and ready to go!!! 11.8@115

And remember friends don't let friend drive MOPARS!!!

I went the cheap route and got a Pep Boys heavy duty radiator and an Auto Zone electric fan to compliment my Stewart high flow water pump. I got the biggest fan Auto Zone had and this setup is working great. The fan only cost me $65 I believe plus the $30 for the Flex Lite thermostat. With an aluminum radiator I think it could easily handle a 400+ HP setup.

------------------
Gunning for 12's!
http://www.indianastangers.com/2Fast..._brd_logo2.gif
Buy your parts here
ICQ# 42269241

my car isnt making killer power, but the blackmagic fan for the 5.0 is awesome, and i picked up some good power, was pretty pricey, but like mentioned above those cheap pepboys fans can hold up sometimes, my friends 347 has just a little bitty perma cool fan probaly from autozone and has no problems.

Oh, i should mention, some people here think the blackmagic fan is crap, and that you will overheat, well i live in south tx, and run cooler than ever.

2FastLX...What size is the biggest fan from Autozone? How much CFM does it put out?

thanks

------------------
88 Notch Natually aspirated 750 carb Edelbrock Victor Jr. Intake and heads 306/ATI C-4 4500 stall 4:10's 26x10.5 M/T MAC longtubes/prochamber Dynomax Race magnumss dumped, Caged and ready to go!!! 11.8@115

And remember friends don't let friend drive MOPARS!!!