Questionarre : What mod should I do next?
 

I really need to start working on the suspension / chassis next. I know for sure I want to put Weld-in subframes first, but after that, what next?
1) Upper and lower control arms
2) Eibach drag launch springs and lakewood 90/10's and 50/50's?

Is it worth installing control arms by themselves, or should I just wait and do all of this at one time?

What do you all think?
Thanks,
Adam

------------------
1993 Conv. LX 5.0, FRPP 302 longblock w/Y303 aluminum heads, E303 cam. 93 cobra intake, 65mm TB, 73mm MAF, 24lb injectors, 255lph fuel pump, Aeromotive AFPR, Underdrive pullies, Motorsport ceramic coated shorty headers, Bassani X-pipe w/converters, American Thunder Cat-back, Lentech AOD, Alum. driveshaft, 3.73's. Best E.T. 13.98 @ 99.78mph w/ 2.171 60' (Fontana Dragway 10/06/01)

ok, if you can afford upper/lower control arms get them, i would, people tell me my car squats real bad everytime i hit 2nd and 3rd, plus traction is always a better mod, do you have a performance stall in the lentech? IMO, 4.10 grs with your setup would give you 2 tenths improvement.

It has a 10" 2800 stall converter. I chose the 3.73's only because I plan on adding a Vortech in the near future but want to get the suspension and chassis setup first.

------------------
1993 Conv. LX 5.0, FRPP 302 longblock w/Y303 aluminum heads, E303 cam. 93 cobra intake, 65mm TB, 73mm MAF, 24lb injectors, 255lph fuel pump, Aeromotive AFPR, Underdrive pullies, Motorsport ceramic coated shorty headers, Bassani X-pipe w/converters, American Thunder Cat-back, Lentech AOD, Alum. driveshaft, 3.73's. Best E.T. 13.98 @ 99.78mph w/ 2.171 60' (Fontana Dragway 10/06/01)