Fuel Pump Install
 

Started replacing my fuel pump last night. I got the tank and old pump out, but it got dark a lot sooner than I expected. I'll finish tonight. The BBK pump I ordered didn't come with new clips for the fule lines. Can I get these clips (one is similar to the fuel filter clips, the other is different) at any parts store or are they a dealer item. I really wouldn't feel comfortable about reusing the old clips.

That pump should have come with the clips..one is like the fuel filter and one is round. You usually can find these at a local parts store, just take the old ones with you. Make sure you use a brass punch so iy will not spark when you are taking the washer off the top of the tank, and unplug the battery.

I read you other thread and although it sounds pricey I paid $1 for the hood prop rod clip so I can believe it was $4.75.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree