How to convert from 4 lugs to 5?
 

Like the subject says what is the easiest way to switch from 4 lugs to 5? Short cuts, of swaps from other vehicles always welcome.
Thanks
KG88GT

http://www.nomotivation.com/5lug.cfm


hope this site helps i will be attempting to swap the rotors for the lincolns and do the axels this spring but i have yet to do it so i cant give any hands on yet but i think if you leave the dust caps off the rotors that you could prob get away with those for the 98 99 cobra and bullit wheels but like i said i am not sure yet

------------------
92lx wannabe saleen
bbk cold air h-pipe flowmasters the rest of the way
complete saleen body kit and wing

I used 2 1988 Ranger drivers side rear axles and 2 1985 Lincoln Mark VII (ABS) rotors.

Everything bolted right up.

what wheels did you use unit

------------------
92lx wannabe saleen
bbk cold air h-pipe flowmasters the rest of the way
complete saleen body kit and wing

With the Lincoln front rotors, the 96-up GT, 98-up Cobra, and 2001 Bullitt wheels will not work. There will be cap interference with the rotor and wheel.

If you want to use those wheels, you need to instal the SN95 spindles and brakes.

If you are not going to be using one of those wheels, then the Lincoln rotors are by far the easiest way to do it.

------------------
1989 LX Convertible, blue with white top and leather, 5 speed.
Engine: Coming out this winter to add heads, intake, cam and other support items... more details as they become available.Drivetrain: FMS clutch with Fortes adjuster, Pro 5.0 shifter w/Cobra knob and aluminum driveshaft through 3.73:1 gears.Chassis: 4 wheel disk w/Cobra front brakes, GT rears and 2001 "Bullitt" wheels
Rear: MM adjustable LCAs with Griggs springs, KYB shocks. Front: Koni red struts,