I need help with my NOS quick
 

i need to know if the jetting for a 150 shot is 67/42 and if it is what the hell is a shim i can never get a straight answer form the nos people i figured you guys probably could help alot more also they told me that 59/42 is a 75 shot and now to find out i think its about a 135 shot any help would be very apriciated. Also if you know how shims work please let me know


------------------
306 edelbrock heads bcam full mac exuast 1.7 rr 373 rear hd clutch tremec holley fp reg (it sucks) extune honed upper intake 75shot of juice

The jets are 67-nos and 42-fuel.

It's kind of hard for me to explain but I will try.

The shim you need is a 42-thousandths and you can get it from an auto parts store, not a shim but a washer that will work just as well.
The blue thing that has a vacuum hose that connects to your fuel pressure regulator; screw the bottom of that off and you will see a spring; put the washer at the bottom and put the spring back on. You will see what I am talking about when you unscrew it.
The correct washer will just barley fit around the post that the spring sets on and there is a rubber ring around the post, push it over that, it will be a little tight.
Then put it back together and your done.

If you know anyone that has a micrometer you can use that to find the correct size.

The only thing I would watch out for is the bottom of the regulator (the blue thing) has a bevel and I would make sure the washer you get fits flat on the bottom.


------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX