c-4
 

Hi all
I know after you read this post you will ask why, so it is to drive it to another state to register it. Can I bolt a C-4 tranny up to my 4banger mustang? Thanks

------------------
91LX Awaiting 351W heart transplant

Depends. Does the converter & converter (bell) housing match up? I know for a fact the housing on my 3.3L is very unique, and you can't find 'em anywhere! You'll have to use a ruler and measure where the tranny bolts up, then if it does match, there shouldn't be a problem. Also, check the distance from the crossmember to the back of the engine. It should also be the same on the C4 you plan on bolting up. Good luck! http://www.mustangworks.com/msgboard/smile.gif

------------------
Capri306
1979 Mercury Capri
I can roast 'em off the line & squawk 'em in second!
3.3L --- C4 w/ B&M Shift Improver Kit, rebuilt with TCI stuff --- 2.73
--The only paid mechanic in high school auto shop--
"Yes, officer, I only have 85 horsepower! I couldn't have been going 98!"

i dont believe it will work, the 4 banger is so much smaller then the 302, the bellhousing on the c4 will be much bigger, and wont fit. The bolt pattern on the 4 banger is not the same either.

------------------
'93 notch converted to a 5.0
AOD, off road H-Pipe, 2 1/2 inch flows, 3.73's, 110 lph pump, K&N, Alum. driveshaft, B&M flexplate. No ET with the 5.0 yet.

Columbus, Ohio