Neutral Drive Switch??????
 

where is this switch. is it the one on the tranny or the one behind the clutch pedal? my car is throwing code 67 and i need to check/replace. any advice or info? thanks

Are you checking your car with the transmission in gear? If so, this could be the problem. Try taking it out of gear and checking for codes again.. see if it comes up.

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

hey thanks alot for the reply but thats probably not it. the engine light comes on sometimes when i depress the clutch. not always though.

No problem... Most people get this code when they check with the car in gear. The switch should be on the tranny. Is it a stock T-5?

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot