MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   carb guys vacuum?? (http://forums.mustangworks.com/showthread.php?t=805)

89LXCarb 02-07-2001 10:57 PM

carb guys vacuum??
 
I'm running a comp cams 280 cam. Summit says that it is too big for power brakes, but I've run it for awhile and it was fine. But I have noticed that the car does run rich cause there's always alot of black soot on the bumper. Could not enough vacuum cause the car to run rich like this?? And could this be cured by adding a vacuum canister?

------------------
4 cyl converted to 302
comp cams cam, ported GT 40 heads, Edelbrock intake, holley carb
Turbo coupe rear with 373's
4 inch cowl hood
finally done after what seemed like forever!!!!!


79Stang 02-08-2001 06:41 PM

I have pretty much the same Cam - but mine is a little smaller (270h)... The canister will give you power brakes thats all... The motor builds up vac. and stores it in the canister - when you tap the brakes it can use the stored up vac... It is just a reserve for the brakes..

Do you have a auto or manuel tranny - if it is stick I don't think you would have a prob with that cam - it's not that big..

Your carb could be another story though...

89LXCarb 02-08-2001 11:19 PM

I have an AOD and a 600 crm holley

79Stang 02-09-2001 01:26 PM

I would look into that carb and check your timming...


All times are GMT -5. The time now is 11:47 PM.