|
CALLING ALL DRAG RACERS FROM SO-CAL!
Lets pick a date in the next month or two and all meet at Carlsbad. Its open every Saturday from 1pm-? We should arrive around 12 though. I want to go, Skyler said that he wants to go. If your up to it post your name and a date and we will all agree on something.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors |
I'm interested. Where's it at?
------------------ 86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s. ************** Crane 2031 on order |
I was just there saturday but it was rained out, take the 5 south to PALOMAR AIRPORT ROAD and make a left. Continue about 2 miles untill you hit BUSINESS PARKWAY and make another left. Drive about 30 yards and make a left on POINSETTIA. Poinsetia is an extremely small street that dead ends where you line up to start the racing.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors |
hmmm...I might have to make a trip out there.
|
give me a date and ill be there, allong with the other stang guys from Camarillo.
|
Inferno, I want you to come! Bring all your turbo imports and show us what you got! Pat Boetticher, pick a date next month or so. Lets pick a date next month so we have time to get ready and DO THIS! Where's Sklyer anyway? He said he was down to go but Im not hearing him. http://www.mustangworks.com/interact...oard/frown.gif Sky, bring your cousins car too.
|
I've got two guys from work that want to go too. March 10/17/24?
------------------ 86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s. ************** Crane 2031 on order |
You know I'm definatly in. My cousins 68 will come too.
Camarillo huh? Some of the street racers out there? Patrick- What kinda car you driving? I used to race out there a little a while back. Also I'll try to get that other guy in moorpark from here to come. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns. 13.2@106mph Daily Driver STOCK-1994 Integra LS 15.48@91mph |
How about the 24th? That should give everyone enough time to tune and prepare. I want to get a set of DR's for this http://www.mustangworks.com/interact...rd/biggrin.gif I know about 15 people with domestics that might be interested too. IS THE 24TH GOOD?
|
I will be definatly be there...Trekking from Yuma AZ I have to plan my trips...coincidently I already wanted to go that weekend! gates open at 1 pm and races go to 6 pm you want to write MW (mustang works) in that lovly shade of white shoe polish on the rear glass so we know who from here is going to be there?
kick a$$! lately there hasnt been a lot of stangs there... |
aww hell I thought you were talking about this month...no matter I will still be there in march, with a few others from yuma!
anyone going to be there feb 24th too? I am going both times regardless so let me know! |
by the way, on either date, if you need to do some work on your car that morning let me know, I will sponsor you to get on Marine Corps Base Mirimar and you can use the Auto Hobby shop there...all you need to get on base is license, registration, and proof of insurance..the shop has GREAT mechanics there to offer help/advice and it costs almost nothing!
anything to help a fellow stanger! ------------------ My Mustang 91 LX Conv. 52,000 orig mi. Hurst shifter, 3.55 grs, NOS 150 dry kit, MSD 6al, MSD timing control, malory coil, pullies, fms adj fuel reg, BBK 70mm tb, Pro-m 75mm maf, battery in trunk, JBA shorties, JBA subs, JBA strut tower brc, dynomax "super turbo" 2 1/2 exhaust, FMS billit distrib, Hotchkis lower cntrl arms, MAC Fenderwell cold air kit, off road h pipe. |
OH OH OH ME TOO! <raises hand frantically>
I am at USC right now, uncle own Lister Rents in Thousand Oaks... T.O. http://www.mustangworks.com/interact...oard/smile.gif So ANYTIME... but email is better for me, I dont check here too much! Jason ------------------ 1992 LX Hatch couple of mods... http://www-scf.usc.edu/~jlister/mustang.htm |
Ed, if I get my exhaust and cont arms put in before the 24th of this month I will be there too. In fact I will write mustangworks on my car with my screenname! hope to see you there. Care for any test and tune this month too sky?
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors |
Sounds good...I am definatly going both times. I dont think all the stuff I just ordered will be installed by feb but it will done by the march date!
Hope to see you there fastang. I will write the same in my window... if anything freaky happens and prevents me from going I will post and let you know (it would have to be something real major to stop me though!) |
I have a 95 performane Red Gt (right now it has primer spots on it pending a paint job that i got screwd out of) I dont acuaslly race at the street races but i go and Hang' with all my buddys. the Location has changed to chuys off the carmen exit in cam..
Give me 2 weeks notice and ill be there!!! all my buddys drive stangs, a '93, 95cobra, 94gt, 95gt, 94gt. ------------------ PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!! [This message has been edited by Patrick Boetticher (edited 02-14-2001).] |
March 24 - I'll be there. "MW" in the window?
------------------ 86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s. ************** Crane 2031 on order |
Patrick: we are going to Carlsbad raceway...not street racing. (you may already know that but your post sounded like you were under that impression...
withamc: I am going to have MW on the back window, and username on drivers quarterwindow (I dont want to confuse the tower, they aren't the sharpest tacks in the box!) |
24th happens to be my dads birthday. I'd really like to make it though. I'm definatly going to try.
Fastang. How far south are you from Ventura/SantaBarbara. Ive never been to carlsbad, but I know its a LONG *** drive for me. Maybe we could meet up and caravan on the way down. Especially the Camarillo guys, I could meet up with them on the way too. That'd be fun. And if you guys didnt already know, my car is the Red Saleen, so you should be able to tell. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns. 13.2@106mph Daily Driver STOCK-1994 Integra LS 15.48@91mph |
I had an idea guys. I know quite a few guys from corral go out to carlsbad too. I could get em to meet up there at the same time too, maybe we could do a Mustangworks vs. Corral type of thing?
Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns. 13.2@106mph Daily Driver STOCK-1994 Integra LS 15.48@91mph |
| All times are GMT -5. The time now is 05:54 PM. |