MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Stang Stories (http://forums.mustangworks.com/forumdisplay.php?f=12)
-   -   carlsbad april 21st (http://forums.mustangworks.com/showthread.php?t=9530)

ed1371 04-15-2001 03:49 AM

carlsbad april 21st
 
Sky and I are going to the track next sat..anyone else?
should be dead..lot of car shows going on that weekend...


Skyman 04-15-2001 03:59 AM

Im going for 12.3's.

Who else is in http://www.mustangworks.com/msgboard/smile.gif

Sky

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
Runs on 87 Octane and gets 24mpg!

46stang 04-15-2001 10:57 AM

i would but I don't think my trans will be in yet. oh well i'll catch the next one. have fun. make sure you air up the air shocks so you can make it through the 4x4 dirt trail http://www.mustangworks.com/msgboard/smile.gif

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies, 373's, 70mm t/b, gutted maf, bassani x-pipe w/cats, ultraflow catback,iat mod, home depot ram air, k@n. fms spings, tri-ax shifter.

Skyman 04-15-2001 04:39 PM

Leon, thats too bad you can't make it. Hmm... well maybe as soon as your tranny is done we can head out to famoso... Much nicer track and my air filter wont fill with dirt.. haha.

Sky

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
Runs on 87 Octane and gets 24mpg!

inferno 04-15-2001 04:42 PM

I should be there in the supra. I'm not looking forward to going off-roading to get to the track though http://www.mustangworks.com/msgboard/frown.gif

------------------
90 Honda CRX aka Project Mongoose
Estimated Completion: 7/1/01

84 Toyota Supra
High flow cat, two chamber flowmaster, custom 2.5" piping, msd 8.5mm wires. Will have boost before 2002.

46stang 04-20-2001 01:03 AM

yea, sky i definately want to try out bakersfield. with your air cleaner set up it's like a eureka upright vac. cleaner. sucks that dirt right up http://www.mustangworks.com/msgboard/smile.gif good luck at carlsbad. hope you bust a 12.3 or better http://www.mustangworks.com/msgboard/smile.gif
I got a pro-m 87 maf, 24#inj., kirban reg, and I've got some BBK longtubes on the way. so with some traction I better at least rip a low 13.0 next time. I hoping to have my trans in and everything with in a month http://www.mustangworks.com/msgboard/smile.gifwe'll see.have fun guys.
leon

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n,373's,cobra brakes,fms spings, tri-ax shifter.

Skyman 04-20-2001 01:54 AM

Whats the forecast?

Sky

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
Going for 11's on 87 octane with A/C and 20+MPG!!!

fastang 04-20-2001 12:49 PM

I really want to go but I need to get my fuel system done first. Im probalby going to order the stuff tommorow. I will go next time for sure.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

ed1371 04-20-2001 03:15 PM

Cant make it this time, was doing a pre-inspect today for the trip out and my front tires are in no condition to make the drive.
going to have to wait at least 3-4 days for my new yoko's to come in.


All times are GMT -5. The time now is 04:13 PM.