what pushrods to use?
 

Which pushrods should I get? http://www.mustangworks.com/interact...d/confused.gifMy old one's are comp cams stock length with comp cams guide plates and I am still using the stock cam.
--------------
'91 lx vert,t5,ported/polished/milled .030 e7 heads,1.6rr,triple valve springs,1.94/1.60 stainless valves,K&N,March pulley set and a/c eliminator kit,electric fans,glasspacks w/dumps

.030 e7 heads... I am guessing that means that you milled your heads. Not sure if that is enough to throw off your valvetrain geomatrey with a stock pushrod. But if you want to be sure, get a pushrod lenth checker from summit, powerhouse, or anyware. then you will know the exact size you need.

------------------
Blown 347 W/Canfield heads, solid roller cam, track times this spring mid 10's or bust

93lx 5.0 daily driver

Yes, I milled my heads. They have been like that since last March. My mechanic friend says it's just a defect in one of the spot-welds( both balls on the ends are missing ).