MustangWorks.com : Ford Forums - View Single Post

92Rustang · 12-19-2001, 08:02 PM

Will I didn't get it running. I installed the rockers and checked the open and closed hieght on the springs. I'm within spec's for the springs and the heads. I was reading some specs on the springs and at. 1.15 open they are at 350lbs is this to much for the cam. (E-303) My open height is 1.5. Do these numbers sound right or am I confussed?

Also I went 3/4 down on the RR's. If I had some to tight my installed height would be different right on smoe springs right?

Thanks again for the help works.

12-19-2001, 08:02 PM	#3
92Rustang Registered Member Join Date: Feb 1999 Location: Smithton, IL, US Posts: 215	Will I didn't get it running. I installed the rockers and checked the open and closed hieght on the springs. I'm within spec's for the springs and the heads. I was reading some specs on the springs and at. 1.15 open they are at 350lbs is this to much for the cam. (E-303) My open height is 1.5. Do these numbers sound right or am I confussed? Also I went 3/4 down on the RR's. If I had some to tight my installed height would be different right on smoe springs right? Thanks again for the help works. __________________ 92 GT 5-speed Windsor Jr,E303,1.7RR,Cobra intake,65mm TB,155lph,24 lbs,75mm MAS,shorties,h-pipe, 2.5 flowmaster,Black magic,Holley adj fuel, 3.73 No times yet. 13.6 before heads,cam,inj,rr www.fordmustanggt.com