MustangWorks.com : Ford Forums - View Single Post - 3.73s coming, any last-minute tips?

john_86stang · 03-26-2001, 03:54 PM

If this is your first time setting up gears, I would definitely not get in a hurry. Go to all the different web sites that have good tech articles(corral.net, etc.) and read, read, read. Make sure you have all the necessary tools to do the job. Then once you have read everything you can find, and have gathered all the proper tools, Be prepared to have your car down for several days. I tell you this because there will be trial and error involved until you learn some of the tricks. Good Luck

------------------
John Welch
86 GT, 3.73's, H-pipe w/ 2-chamber Flows, No smog pump or A/C, crank pulley, K&N in stock box, adj. FPR, bypassed EGR(coolant) Best Run 14.34 @100.0 MPH (on G-Tech)

03-26-2001, 03:54 PM	#3
john_86stang Registered Member Join Date: Jan 2001 Location: Crossett, Arkansas USA Posts: 45	If this is your first time setting up gears, I would definitely not get in a hurry. Go to all the different web sites that have good tech articles(corral.net, etc.) and read, read, read. Make sure you have all the necessary tools to do the job. Then once you have read everything you can find, and have gathered all the proper tools, Be prepared to have your car down for several days. I tell you this because there will be trial and error involved until you learn some of the tricks. Good Luck ------------------ John Welch 86 GT, 3.73's, H-pipe w/ 2-chamber Flows, No smog pump or A/C, crank pulley, K&N in stock box, adj. FPR, bypassed EGR(coolant) Best Run 14.34 @100.0 MPH (on G-Tech)