i was reading an article
that was talking about reliable 700 HP numbers being attainable with the 4.6l 4v!
with STOCK internals!
they mentioned that the stock fuel lines were a bottleneck, but the stock fuel rails were retained. intake was ported, heads ported, beefed transmission, 14 lb boost, running 11.0x @ 127 mph!
woo hoo!
with the 2v, there is a great article in MM+FF about using the bullitt intake in conjunction with a blower for a 45 hp increase (if i recall correctly) over the stock 2v intake with the same blower.
not a bad mod!
good luck!
|