MustangWorks.com : Ford Forums - View Single Post - Need some professional advice - head work, valve springs, rockers, cam. pretty long.

Tom351 · 01-10-2001, 03:54 PM

for studs, they need to pull the old ones, and tap the head for screw in studs. The press in studs can get puled out with big cams that use higher valve spring pressures

------------------
67 Fastback - Arctic White Pearl paint
351W ,Trick Flow Aluminum Heads, Edelbrock TorkerII, Comp. Cam, Performance Automatic C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars.

My 351W Fastback

01-10-2001, 03:54 PM	#8
Tom351 Registered Member Join Date: Oct 2000 Location: Atlanta,GA,USA Posts: 278	for studs, they need to pull the old ones, and tap the head for screw in studs. The press in studs can get puled out with big cams that use higher valve spring pressures ------------------ 67 Fastback - Arctic White Pearl paint 351W ,Trick Flow Aluminum Heads, Edelbrock TorkerII, Comp. Cam, Performance Automatic C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars. My 351W Fastback