totally, completely , 100% safe to spray 125 on your setup. Perfectly safe to spray 125 on a stocker actually...as long as the pump and injectors are a little better than stock.
1/2 of your natural hp, is what is recommended. I like the dry kit from NOS....
That kit is about $480.
You may want a bottle warmer....about $120
and a blanket...$35
purge kit is not too necessary( i have one and don't even use it)$120 i think??
remote bottle valve would nice but $190 (get tired of going into the trunk all the time)
You should also run a guage that you can see....if the bottle is cold you may only make 600 psi....warm to hot could be 900-1000psi.
900 is optimal. you could lose about 30 hp from low pressure.
The dry kit can be jetted from 75-150.
But the 125+ settings require a shim that doesn't come w/ the stage 1 kit. (you can use a washer) so the stage 2 kit is not necessary for you.
you can do it by yourself in about 2 hours(maybe 3)
Also i've seen this kit selling used for as low as $200...usually about $250-$300 and sometimes get some of those extras w/ it.
used kit is perfectly safe....have fun...sorry so long.
------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at
http://www.burnouts.webprovider.com