first off, do not get equal shortys, I bought some bbk 1-5/8" equal shortys, and then found out it will be about a 4 hour job to put them on. if your into headers so you can bolt on the stock h-pipe for emissions like i am, i would stick to the stock headers until you have ported your heads/aftermarket heads and intake.
you could also look at underdrive pulleys, ram air, a shifter (example Steeda Tri-Ax).......
__________________
1984 Bronco II, 36" Michelin Military Tires, 95 EFI 5.0, NP435 Tranny, NP208 Doubler, NP205 Transfer Case, Fill Size Solid Dana 44 Front End, WH Progressive Rate Rock Crawling Coils, Bronco 8.8 Rear, Skyjacker Softride Leafs, 5.13 Gears, Detroit Locker. Final Crawl Ratio Of 175:1
88 GT
Best 60ft. 2.181
Best ET 14.350
Best MPH 98.01
~WRECKED!!!!~
|