MustangWorks.com : Ford Forums - View Single Post

tra9379 · 02-20-2002, 02:43 AM

I'm building a motor right now, the block is a m-6007-b50, edelbrock performer heads, e303 cam, 1.7 rockers, performer intake, 65mm tb, with 24 lb injectors.

I would like to put an A trim blower on it, but I don't know if it needs timing retard, or an FMU. Would I be better with 30# injectors? And should I stick with the 1.7's or go with 1.6's. I want to be able to pass emmisions with this motor.

Thanx

02-20-2002, 02:43 AM	#1
tra9379 Registered Member Join Date: Apr 1999 Location: Burbank, IL Posts: 249	Need a little advise here I'm building a motor right now, the block is a m-6007-b50, edelbrock performer heads, e303 cam, 1.7 rockers, performer intake, 65mm tb, with 24 lb injectors. I would like to put an A trim blower on it, but I don't know if it needs timing retard, or an FMU. Would I be better with 30# injectors? And should I stick with the 1.7's or go with 1.6's. I want to be able to pass emmisions with this motor. Thanx __________________ Current Mods: Mac 1 5/8" Unequal headers, 2 1/2" off road H-pipe, Mac Flowpath Cat-back. Timing @ 14, Mac Fenderwell kit, Built AOD.