MustangWorks.com : Ford Forums - View Single Post

gray87GT · 04-12-2001, 02:08 PM

When installing the pushrods and rockers, you put a dab of moly grease on each end of the pushrod, and on the valve stem tip. That should be all to worry about. You should prime the pump until the oil gets up into the heads.

04-12-2001, 02:08 PM	#6
gray87GT Registered Member Join Date: Jan 2001 Location: Minnesota Posts: 177	When installing the pushrods and rockers, you put a dab of moly grease on each end of the pushrod, and on the valve stem tip. That should be all to worry about. You should prime the pump until the oil gets up into the heads.