MustangWorks.com : Ford Forums - View Single Post

91evilstang · 04-18-2001, 07:10 PM

Okay I have 1.6 svo roller rockers under stock valve covers wich nessitates the removal of the baffel plate.Now when I down shift and the vacuum climbs the vacuum hose from the t/b to the oil filler tube sucks oil into my intake,Big time.I have oil laying in my throttle body all the time and when i do the downshifting smoke billows from the exhaust(very embarassing).basicaly I was wondering if any body had an alternative that would still allow proper crank case ventalation.

------------------
91GT Flowmaster 2 chambers,off road H pipe,mac equalength headers,F303 cam,high lift valve springs ,svo 1.6 roller rockers,14*timing,410's,BBK cold air kit,hurst shifter.Ran 13.5@101 with stock headers and air box.

04-18-2001, 07:10 PM	#1
91evilstang Registered Member Join Date: Mar 2001 Location: lafayette IN USA Posts: 48	MY CAR SUCKS (oil) Okay I have 1.6 svo roller rockers under stock valve covers wich nessitates the removal of the baffel plate.Now when I down shift and the vacuum climbs the vacuum hose from the t/b to the oil filler tube sucks oil into my intake,Big time.I have oil laying in my throttle body all the time and when i do the downshifting smoke billows from the exhaust(very embarassing).basicaly I was wondering if any body had an alternative that would still allow proper crank case ventalation. ------------------ 91GT Flowmaster 2 chambers,off road H pipe,mac equalength headers,F303 cam,high lift valve springs ,svo 1.6 roller rockers,14*timing,410's,BBK cold air kit,hurst shifter.Ran 13.5@101 with stock headers and air box.