I use a VERY thin layer of black RTV on the threads that go into the block and put them in hand tight. I also use the moly lube for the nuts and torq the top to 70 and the lower to 65 in increments(sp?) of 15.
Good luck,
Wade
__________________
79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor
93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe
Ricer hater's club member #49
|