i agree, you wont want a 70mm with an all stock setup. it will take a lot of port work to the upper intake to match it up. and you wont gain any power. you will lose it.
go with a 65mm and port just a little bit to make it work. but dont expect it to make a big difference in power.
take care,
adam
__________________
90 GT black/ grey leather
ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc....
http://avbcon12.stangnet.com
|