After reading into the manual a little better I found the simulated test conditions the motor is run under
Fuel;
1. Gasoline rated @ 19,000btu/lb as standard fuel
2. Sufficient octane to prevent detonation
3. Air/Fuel ratio is a constant at 13:1 for best power
Environment;
1. Air for induction is 68 deg farenhiet with 0% humidity and 29.86-in/Hg atmospheric pressure
2. Engine oil, and coolant have been warmed to operating temperature
Methodology;
the engine is simulated by bring it up to a 2000 rpm hold, then it is run with a 500 rpm step test
|