MustangWorks.com : Ford Forums - View Single Post

Hozer 88GTConv · 04-10-2002, 07:25 PM

It is a triangular shaped plastic piece about 4 inches long along the outer tooth arc. It is held in place by a cotter key and spring.
You'll have to do it mostly by feel.
I believe I retracted the drivers seat all the way back, and reclined it and then climbed in upside down so my eyes were right next to the clutch pedal.
Have a good droplight, and take your time and it won't take long.
Took me about 45 mins.

04-10-2002, 07:25 PM	#14
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	Clutch Pawl... It is a triangular shaped plastic piece about 4 inches long along the outer tooth arc. It is held in place by a cotter key and spring. You'll have to do it mostly by feel. I believe I retracted the drivers seat all the way back, and reclined it and then climbed in upside down so my eyes were right next to the clutch pedal. Have a good droplight, and take your time and it won't take long. Took me about 45 mins. __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy