The SN95's manual transmissions have a longer input shaft, and input bearing retainer. Therefore the bellhousing is longer too. A Tremec 3550, or TKO, or 93/down T-5 will work with the proper bellhousing.
Be prepared to lengthen your driveshaft either by retubing it or buying a spacer to bolt between the pinion flange and the end of the driveshaft.
Also the shifter hole in the transmission tunnel will need to be cut out alittle on the front side.
andy
__________________
88 coupe
91 LX NMRA Pure Street 5120
|