It's funny, I adapted mine pretty similar to yours. I used a 3inch 90 degree ABS elbow and a 3 inch sleeve. I was able to clamp the sleeve onto the 1/2 inch sticking out of the MAFS. I then put the 3inch elbow into the sleeve and I bonded the 3 inch elbow to the air filter (E-0940) with JB Weld and let it sit all night. It seems to work very well and the whole filter is sitting inside the fender wall.
__________________
89 LX Hatch 5.0 5spd, alot of miles, terrible 2.73's, mac cai, pullies, Tri-Ax, 16* timing, elect fan, 3G alt
Best to date: 14.331@97.46mph with 14*/stock fan/short belt and a 2.222 60' in 90 degree weather
Waiting to put on Off road H and 1 5/8 headers
Rice Hater's Club #36
|