MustangWorks.com : Ford Forums - View Single Post

8850 · 04-28-2001, 09:58 PM

Stock cam lift is .442. Stock rockers have a 1.59 ratio. With 1.70 ratio your lift will be .4726. You should be good to go.

------------------
88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph dyno= http://www.fbody.com/members/LarryS/mustdyno.jpg

[This message has been edited by 8850 (edited 04-28-2001).]

04-28-2001, 09:58 PM	#2
8850 Registered Member Join Date: Nov 1998 Location: Sugarland, TX USA Posts: 161	Stock cam lift is .442. Stock rockers have a 1.59 ratio. With 1.70 ratio your lift will be .4726. You should be good to go. ------------------ 88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph dyno= http://www.fbody.com/members/LarryS/mustdyno.jpg [This message has been edited by 8850 (edited 04-28-2001).]