MustangWorks.com : Ford Forums - View Single Post

NotchJohnson · 04-25-2002, 08:02 PM

Zex claims to have the safest kit on the market today, but as long as its used properly, every kit is safe. The kit includes a nitrous managment unit, which is just a small box containing the solenoids. Very easy to install. A wire hooks up to one of the leads running out of your tps, another wire sets a ground, and one is hot. The kit actually learns how much voltage you are reading at your tps on wide open throttle, and thats what tells it when to shoot. It is also supposed to know how much juice to shoot due to bottle pressure, so you dont shoot too much when the bottle is full, or too little when its empty. It has 2 vacuum hoses, one runs to the fpr, the other runs to the back of the intake. The only other thing you have to do is tap into your air induction tube(or hose) after the mass air and screw in the nozzle. Overall its really easy to install, the instructions suck-but we are all used to that. If you decide to go with the kit I would order it from atlanticspeed.com. Its 469 plus shipping so it comes out to less then 500 to your door. If you decide to get it and need some help with the install just let me know man -John

04-25-2002, 08:02 PM	#9
NotchJohnson Registered Member Join Date: Oct 2001 Location: Florida Keys Posts: 593	Zex claims to have the safest kit on the market today, but as long as its used properly, every kit is safe. The kit includes a nitrous managment unit, which is just a small box containing the solenoids. Very easy to install. A wire hooks up to one of the leads running out of your tps, another wire sets a ground, and one is hot. The kit actually learns how much voltage you are reading at your tps on wide open throttle, and thats what tells it when to shoot. It is also supposed to know how much juice to shoot due to bottle pressure, so you dont shoot too much when the bottle is full, or too little when its empty. It has 2 vacuum hoses, one runs to the fpr, the other runs to the back of the intake. The only other thing you have to do is tap into your air induction tube(or hose) after the mass air and screw in the nozzle. Overall its really easy to install, the instructions suck-but we are all used to that. If you decide to go with the kit I would order it from atlanticspeed.com. Its 469 plus shipping so it comes out to less then 500 to your door. If you decide to get it and need some help with the install just let me know man -John __________________ 89 notch-finally not stock!! ported gt40's, ported cobra intake, 65mm tb, 75mm maf, mac cai, lt's,prochamber, fms 1.6 rr, 125 shot.