MustangWorks.com : Ford Forums - View Single Post

fubar89lx · 04-27-2002, 06:11 PM

I'm not sure about Richmond gears. I would recomend cleaning the housing very well and replace the carrier bearings also. As for the turning torque on the pinion nut, I have a Snap-on turning torque wrench. I'm not sure about the spec right now. I can check when I go to work on Monday.The torque wrench ran about $350 bones.Good luck

04-27-2002, 06:11 PM	#8
fubar89lx Registered Member Join Date: Apr 2002 Location: Palm Bay,FL Posts: 24	I'm not sure about Richmond gears. I would recomend cleaning the housing very well and replace the carrier bearings also. As for the turning torque on the pinion nut, I have a Snap-on turning torque wrench. I'm not sure about the spec right now. I can check when I go to work on Monday.The torque wrench ran about $350 bones.Good luck __________________ Best E/T-13.2 Best MPH-108 Mods-Full exhaust,U/D pulleys,73mm mass air,70 mm M/A,Cobra intake,Crane 1.7 R/R,E303 Cam,3.55 gear,125HP Nitrous Works.