Well i did some reading and the Trickflow intakes out flowed most of the intakes out there. But the real test was at the track. I was pulling 14.2 @98mph with the auto trans consistantly. No heads just stock ones and stock intake. Then i put on the street heat Trickflow upper/lower (flows 230cfm each intake port) went to the track and pulled 13.9 @101mph, just with the intake. Wow i finally hit the 13's. There are lots of different intakes now, so one thing u should do is match the intake with the heads your going to get, because there would be no point in getting a intake which flows more than your heads can push out.
Ian
|